Knitting Pattern

Cable Jumper

SIZES
S (M) L

MEASUREMENTS
Fits chest circumference: 82-90 (98) 106-110 cm
Sweater circumference: approx. 99 (104) 112 cm
Length: Approx. 53 (53) 54 cm

YARN
500 (500) 550 g Peruvian from Filcolana in colour 141 (Alaskan Bue)
125 (125) 150 g Tilia from Filcolana in colour 340 (Ice Blue)

NEEDLES
Circular needles 5.5 and 6 mm, 60 and 80 cm
Doublepointed needles 5.5 og 6 mm (ommit if working magic loop on long circular needle).
Cable needle

EXTRAS
5 stitch markers
2 stitch holders

GAUGE
19,5 sts and 22 rounds worked in pattern on 6 mm needles = 10 cm x 10 cm.
Swatch is measured after wash in relaxed drape.
Needle size is for guidance only.
If you hae more sts on 10 cm, change to larger needles, if fewer sts on 10 cm, change to smaller needle

ABBREVIATIONS AND TECHNIQUES
st(s): stitch(es)
k: knit
p: purl
tbl: through back loop
tog: together

C4F
Slip 4 sts to cable needle and hold in front of work, k4, knit sts on cable needle.

M1L (LEFT SLANTED KNIT INCREASE)
From the front, lift the horizontal strand between stitches with the left needle and knit through the back loop (1
st increase).

M1R (RIGHT SLANTED KNIT INCREASE)
From the back, lift the horizontal strand between the two stitches with the left needle and knit through the front
loop (1 st increase).

M1LP (LEFT SLANTED PURL INCREASE)
From the front, lift the horizontal strand between stitches with the left needle and purl through the back loop (1
st increase).

M1RP (RIGHT SLANTED PURL INCREASE)
From the back, lift the horizontal strand between the two stitches with the left needle and purl through the front
loop (1 st increase).

PF&B
Purl in front and back loop of next stitch (1 st increase)

GERMAN SHORT ROWS (GSR)
Turn work and slip st onto right needle with yarn in front. Tug the yarn up and over the needle. This creates a
double stitch. Continue working the row as instructed in the pattern. On next row work the double sts together
as either k2tog or p2tog depending on what the stitches indi¬cate.

BACKWARD LOOP CAST ON
Form a loop with the yarn, so the end attached to the skein of yarn is in front of the end attached to the sts
on the needle, insert the right needle through the front of the loop and pull tight so the loop becomes a stitch
around the needle. Repeat until you have the desired number of stitches.

WORKFLOW
The jumper is worked topdown in the round. The yoke is worked with short rows to accommodate a better fit.
When all increases round shoulders are made, increases are worked on sleeve cup, finally yoke is finished with
raglan increases.
Sleeve stitches are set to rest, body and sleeves are then finished seperately.

CABLE PATTERN
1st round: *p3, k3, p3, C4F, repeat from * to end of round.
2nd-10th round: *p3, k3, p3, k8, repeat from * to end of round.
Repeat 1st to 10th round throughout work.
Pattern

FUNNEL NECK
Cast on 102 sts using 5.5 mm needles, place marker for beginning of round and join round.
Begin with 6th (3rd) 7th round of cable pattern and repeat all 10 rounds of pattern until work measures approx.
12 (13) 14 cm. Last round must be 4th (1st) 8th round.

Change to 6 mm needles.

YOKE
Next round: p3, place marker, k3 (shoulder sts), place marker, work 48 sts in pattern, place marker, k3 (shoulder
sts), place marker, work pattern to end of round.
Now work increases on each side of shoulder sts AT SAME TIME work short rows to raise the neck, as follows:

Note: Stitch markers are slipped from left to right needles as you go.

1st short row (RS): p3, M1R, slip marker, k3, slip marker, M1L, p1, turn work.

2nd short row (WS): GSR, p1, M1LP, slip marker, p3, slip marker, M1RP, p1, work all sts stitchwise to next shouldermarker, M1LP, slip marker, p3, slip marker, M1RP, k1, turn work.

3rd short row: GSR, k1, M1R, slip marker, k3, slip marker, M1L, k1, work pattern to last 2 sts before next shouldermarker, k2, M1R, slip marker, k3, slip marker, M1L, k2, p2, turn work.

4th short row: GSR, k1, p3, M1L, slip marker, p3, slip marker, M1R, p3, work pattern to last 2 sts before next
shouldermarker, p2, M1LP, slip marker, p3, slip marker, M1RP, p2, k2, turn work.

5th short row: GSR, p1, k3, M1RP, slip marker, k3, slip marker, M1LP, k3, work pattern (remember to do C4F) to
last sts before next shouldermarker, p1, M1RP, slip marker, k3, slip marker, M1LP, p1, k3, p2, turn work.

6th short row: GSR, k2, p3, k2, M1L, slip marker, p3, slip marker, M1R, k2, work all sts stitchwise to last st before next shouldermarker, k1, M1L, slip marker, p3, slip marker, M1R, k1, p3, k3, turn work.

7th short row: GSR, p2, k3, p2, M1RP, slip marker, k3, slip marker, M1LP, p2, k3, work pattern to last 3 sts before
next shouldermarker, p3, M1R, slip marker, k3, slip marker, M1L, p3, k3, turn work.

8th short row: GSR, p2, k3, p1, M1LP, slip marker, p3, slip marker, M1RP, p1, k3, work all sts stitchwise to last 3
sts before next shouldermarker, k3, M1LP, slip marker, p3, slip marker, M1RP, k3, p3, turn work.

9th short row: GSR, k2, p3, k1, M1R, slip marker, k3, slip marker, M1L, k1, p3, work pattern to last 2 sts before
next shouldermarker, k2, M1R, slip marker, k3, slip marker, M1L, k2, p3, turn work.

SIZE S AND L ONLY
10th short row: GSR, k2, p3, M1L, slip marker, p3, slip marker, M1R, p3, work all sts stitchwise to last 2 sts
before next shouldermarker, p2, M1LP, slip marker, p3, slip marker, M1RP, p2, k3, turn work.

SIZE M ONLY
10th short row: GSR, k2, p3, M1L, slip marker, p3, slip marker, M1R, p3, work all sts stitchwise and work C4F as
described below, to last 2 sts before next shouldermarker, p2, M1LP, slip marker, p3, slip marker, M1RP, p2, k3,
turn work.

Work C4F as follows: Slip 4 sts to cable needle and hold in front of work, p4, purl sts from cable needle.

ALL SIZES
Last short row (RS): GSR, p2, k3, M1R, slip marker, k3, slip marker, M1L, k3, work pattern to end of round.
10 sts are increased on each side of the shoulder sts and all short rows has been made.

Continue in the round and work last GSR’s as follows:

Next round: Work pattern to shouldermarker, M1R, slip marker, k3, slip marker, M1L, work pattern to first GSR
and purl this, k2, work pattern to next GSR and knit this, p2, work pattern to next GSR and purl this, continue in
pattern to last sts before next GSR, *slip st knitwise and slip back to left needle without twisting st, work st ktbl
together with first loop of GSR (the loop that looks like a yarn over), purl next loop of GSR*, p2, knit next GSR,
k1, repeat from *-*, p2, k4, M1R, slip marker, k3, M1L, k4, work pattern to end of round.

Continue in rounds working pattern, AT SAME TIME increase on each side of the shoulder stitches, on all
rounds, as follows:

Increased st is to be a knit st: Work M1R before shoulder sts and M1L after shoulder sts.

Increased st is to be a purl st: Work M1RP before shoulder sts and M1LP after shoulder sts.

Continue as established until a total of 17 (20) 23 sts has been increased on each side of the shoulder sts, last
round is the 2nd round of pattern.

You have 82 (88) 94 sts on front and back, and a total of 176 (188) 200 sts on round.
5

Increasing for shoulders are done, now work increases for sleeve cup on every other round, on sleeve side of
markers. Hereafter markers will be named as sleeve markers.

INCREASE FOR SLEEVE CUP
1st round: *Work pattern to sleeve marker, slip marker, M1R, k to marker, M1L, slip marker*, repeat from * to *
once, work pattern to end of round.

2nd round: *Work all sts stichwise to end of round.

Repeat 1st and 2nd round once more.

5th round: *Work pattern to sleeve marker, slip marker, M1LP, knit to marker, M1RP, slip marker*, repeat from *
to * once, work pattern to end of round.

6th round: Repeat 2nd round.

7th round: *Work pattern to sleeve marker, slip marker, Pf&b, work pattern to last st before marker, Pf&b, slip
marker*, repeat from * to * once, work pattern to end of round.

8th round: Repeat 2nd round.

Repeat 7th and 8th round once more.

11th round: *Work pattern to sleeve marker, slip marker, M1R, work pattern to marker, M1L, slip marker*, repeat
from * to * once, work pattern to end of round.

12th round: Repeat 2nd round.

Repeat 11th and 12th round twice more.

17th round: *Work pattern to sleeve marker, slip marker, M1LP, work pattern to marker, M1RP, slip marker*,
repeat from * to * once, work pattern to end of round.

18th round: Repeat 2nd round.

19th round: Repeat 7th round.

20th round: Repeat 2nd round.

Continue in pattern as established and increases on every other round, work increases on sleeve side of markers, as follows:

Increased st is to be a knit st: Work M1R after marker and M1L before marker.

Increased st is to be a purl st placed between 2 knit sts: Work M1LP after marker and M1RP before marker.

Increased st is to be a purl st placed before or after an excisting purl st: Work to the purl st, work Pf&b.

Continue like described until a total of 14 (19) 19 sleeve increases has been made, and there is a total of 32
(42) 42 sts on each sleeve. Last round is without increases.

Now work sleeve increases as established, AT SAME TIME work 5 (6) 6 raglan increases on body, as follows:

RAGLAN INCREASE, SIZE S ONLY

1st round: *Work pattern to last 3 sts before sleeve marker, M1LP, p3, slip marker, M1R, work sleeve sts in pattern to marker, M1L, slip marker, p3, M1LP*, repeat from * to * once, work pattern to end of round.

2nd round: Work pattern to end of round, purl new sts on body and knit new sts on sleeve.

3rd round: *Work pattern to last 3 sts before sleeve marker, Pf&b, p2, slip marker, M1R, work sleeve sts in pattern to marker, M1L, slip marker, p2, Pf&b*, repeat from * to * once, work pattern to end of round.

4th round: Repeat 2nd round.

Repeat 3rd and 4th round once more.

7th round: *Work pattern to last 3 sts before sleeve marker, M1L, p3, slip marker, M1R, work sleeve sts in pattern to marker, M1L, slip marker, p3, M1R*, repeat from * to * once more, work pattern to end of round.

8th round: Work pattern to end of round, knit all new sts.

Repeat 7th and 8th round once more.

There is 42 sts on each sleeve and 92 sts on back and front.

RAGLAN INCREASE, SIZE M ONLY

1st round: *Work pattern to last 3 sts before sleeve marker, M1L, k3, slip marker, increase 1 sleeve st each

side as described and work sleeve st in pattern to marker, slip marker, k3, M1R*, repeat from * to * once, work
pattern to end of round.

2nd round: Work pattern as established, knit new sts on body.

Repeat 1st and 2nd round twice more.

7th round: *Work pattern to last 3 sts before sleeve marker, M1RP, k3, slip marker, increase 1 sleeve st each
side as described and work sleeve st in pattern to marker, slip marker, k3, M1LP*, repeat from * to * once, work
pattern to end of round.

8th round: Work pattern as established, purl new sts on body.

9th round: *Work pattern to last 4 sts before sleeve marker, Pf&b, k3, slip marker, increase 1 sleeve st each
side as described and work sleeve st in pattern to marker, slip marker, k3, Pf&b*, repeat from * to * once, work
pattern to end of round.

10th round: Repeat 8th round.

Repeat 9th and 10th round once more.

There is 54 sts on each sleeve and 100 sts on back and front.

RAGLAN INCREASE, SIZE L ONLY

1st round: *Work pattern to last 3 sts before sleeve marker, Pf&b, p2, slip marker, M1RP, work sleeve sts in
pattern to marker, M1LP, slip marker, p2, Pf&b*, repeat from * to * once, work pattern to end of round.

2nd round: Work pattern to end of round, purl all new sts.

3rd round: *Work pattern to last 3 sts before sleeve marker, Pf&b, p2, slip marker, Pf&b, work sleeve sts in pattern to last st before marker, Pf&b, slip marker, p3, Pf&b*, repeat from * to * once, work pattern to end of round.

4th round: Repeat 2nd round.

Repeat 3rd and 4th round once more.

7th round: *Work pattern to last 3 sts before sleeve marker, M1L, p3, slip marker, M1R, work sleeve sts in pattern to marker, M1L, slip marker, p3, M1R*, repeat from * to * once, work pattern to end of round.

8th round: Work pattern to end of round, knit all new sts.

Repeat 7th and 8th round twice more.

There is 54 sts on each sleeve and 106 sts on back and front.

ALL SIZES
Body
Divide work and set sleeve sts to rest on stitch holders, as follows:
Next round: *Work pattern to last 3 sts before sleeve marker, slip these 3 sts, all sleeve sts and next 3 sts onto
a stitch holder, removing sleeve markers as you go, place new marker, cast on 11 (8) 9 new sts using the backward loop cast on technique, place new marker*, repeat from * to * once, work pattern to end of round.

There is now 194 (204) 218 sts on needle.

SIZE S ONLY
Next round: *Work pattern to marker, slip marker, k1, p3, k3, p3, k1, slip marker*, repeat from * to * once, work
pattern to end of round.

Repeat this round until entire jumper measures approx. 55 cm from top of shoulder.

SIZE M ONLY
Work pattern as established until entire jumper measures approx. 56 cm from top of shoulder.

SIZE L ONLY
Next round: *Work pattern to marker, slip marker, p3, k3, p3, slip marker*, repeat from * to * once, work pattern
to end of round.
Repeat this round until entire jumper measures approx. 57 cm from top of shoulder.

ALL SIZES
Note: When working the jumper measures approx. 3 cm more than stated finished length. When wearing the
jumper, the pattern will widen and shorten the full length of body. When measuring the sweater, leave it flat and
relaxed on a horizontal surface.

If next round is 1st pattern round where C4F is worked, please work 2 more rounds.

Bind off all sts, as follows:
Work purl sections p2tog, p1 when binding off.

Work cable sections k3, k3tog, k2 when binding off
Bind off stockinette sections knitwise.

SLEEVES
Slip resting 48 (60) 60 sleeve sts to 6 mm needle, place marker, pick up and knit 9 (8) 8 sts along bottom of
armhole, place marker and join round = 57 (68) 68 sts.

SIZE S ONLY
Next round: Work pattern to first marker, slip marker, k3, p3, k3, slip marker, work pattern to end of round.
Repeat this round to sleeve measures 42 cm from armhole.

SIZE M AND L ONLY
Next round: Work pattern to end of round.
Repeat this round to sleeve measures (40) 38 cm from armhole.

ALL SIZES
Bind off as on body.

FINISHING
Weave in loose ends.

Wash jumper according to washing instructions on labels and leave flat to dry on a towel.